Chapter 14 Filters
AMG1302-T11C User’s Guide
164
The following table describes the labels in this screen.
Table 60 Security > Filter
LABEL DESCRIPTION
Rule Type
Rule Type selection Select White List to specify traffic to allow and Black List to specify traffic to
disallow.
MAC Filter Rule Editing
MAC Filter Rule Index Select the index number of the filter rule.
Active Use this field to enable or disable the filter rule.
Source MAC Address Enter the MAC addresses of the clients that are allowed access to the AMG1302-
T11C. Enter the MAC addresses in a valid MAC address format, that is, six
hexadecimal character pairs, for example, 12:34:56:78:9a:bc.
MAC Filter Listing
MAC Filter Rule Index Select the index number of the filter set from the drop-down list box.
# This is the index number of the rule in a filter set.
Active This field shows whether the rule is activated.
Mac Address This is the MAC address of the packets being filtered.
Apply Click this to apply your changes.
Delete Click this to remove the filter rule.
Cancel Click this to restore your previously saved settings.
To Next Page
Loading...
