Chapter 2 Introducing the Web Configurator
AMG1302-T11C User’s Guide
19
Note: For security reasons, the AMG1302-T11C automatically logs you out if you do not
use the web configurator for five minutes (default). If this happens, log in again.
5 The following screen displays if you have not yet changed your password. It is strongly
recommended you change the default password. Enter a new password, retype it to confirm and
click Apply.
Figure 5 Change Password Screen
6 The Quick Start Wizard screen appears. You can configure basic Internet access, and wireless
settings. See Chapter 3 on page 25 for more information.
7 After you finished or closed the Quick Start Wizard screen, the Connection Status page
appears.
To Next Page
Loading...
