Appendix B Setting up Your Computer’s IP Address
AMG1302-T11C User’s Guide
246
Figure 150 Macintosh OS X: Network
4 For statically assigned settings, do the following:
•From the Configure box, select Manually.
• Type your IP address in the IP Address box.
• Type your subnet mask in the Subnet mask box.
• Type the IP address of your AMG1302-T11C in the Router address box.
5 Click Apply Now and close the window.
6 Turn on your AMG1302-T11C and restart your computer (if prompted).
Verifying Settings
Check your TCP/IP properties in the Network window.
Linux
This section shows you how to configure your computer’s TCP/IP settings in Red Hat Linux 9.0.
Procedure, screens and file location may vary depending on your Linux distribution and release
version.
Note: Make sure you are logged in as the root administrator.
To Next Page
Loading...
