Chapter 4 Tutorials
AMG1302-T11C User’s Guide
50
This tutorial uses the following example IP settings:
To configure a static route to route traffic from N1 to N2:
1 Log into the AMG1302-T11C’s Web Configurator.
2 Click Network Setting > Static Route.
3 Click Edit on a new rule in the Static Route screen.
4 Configure the Static Route Setup screen using the following settings:
4a Type 192.168.10.0 and subnet mask 255.255.255.0 for the destination, N2.
4b Select Enable and type 192.168.1.253 (R’s N1 address) in the Gateway IP Address field.
4c Enter 1 in the Metric field.
Table 8 IP Settings in this Tutorial
DEVICE / COMPUTER IP ADDRESS
The AMG1302-T11C’s WAN 172.16.1.1
The AMG1302-T11C’s LAN 192.168.1.1
A 192.168.1.34
R’s N1 192.168.1.253
R’s N2 192.168.10.2
B 192.168.10.33
To Next Page
Loading...
