Chapter 8 Basic Setting
GS1350 Series User’s Guide
119
8.11 Cloud Management
Note: NebulaFlex for hybrid mode and NCC registration are NOT supported at the time of
writing and reserved for future use.
The Zyxel Nebula Control Center (NCC) is a cloud-based network management system that allows you
to remotely manage and monitor Zyxel Nebula APs, Ethernet switches and security gateways.
The Switch is managed and provisioned automatically by the NCC (Nebula Control Center) when:
• It is connected to the Internet.
• The Nebula Control Center Discovery feature is enabled.
• It has been registered in the NCC.
This screen displays links to Nebula Control Center Discovery where you can have the Switch search for
the NCC (Nebula Control Center) and to Nebula Switch Registration which has a QR code containing
the Switch’s serial number and MAC address for handy registration of the Switch at NCC.
Click Basic Setting > Cloud Management in the navigation panel to display this screen.
Figure 93 Basic Setting > Cloud Management
8.11.1 Nebula Center Control Discovery
Click Basic Setting > Cloud Management > Nebula Control Center Discovery to display this screen.
Figure 94 Basic Setting > Cloud Management > Nebula Control Center Discovery
Select Active to turn on NCC discovery on the Switch. If the Switch has Internet access and has been
registered in the NCC, it will go into cloud management mode.
In cloud management mode, then NCC will first check if the firmware on the Switch needs to be
upgraded. If it does, the Switch will upgrade the firmware immediately. If the firmware does not need to
be upgraded, but there is newer firmware available for the Switch, then it will be upgraded according
to the firmware upgrade schedule for the Switch on the NCC. Below is the process for upgrading
firmware:
1 Download firmware via the NCC.
2 Upgrade the firmware and reboot.
To Next Page
Loading...
