ZyXEL Communications GS1350 Series - CHAPTER 3 Hardware Panels

GS1350 Series User’s Guide
32
CHAPTER 3
Hardware Panels
This chapter describes the front panel and rear panel of the Switch and shows you how to make the
hardware connections.
3.1 Front Panel
The following figures show the front panels of the Switch.
Figure 10 Front Panel: GS1350-6HP
Figure 11 Front Panel: GS1350-12HP
Figure 12 Front Panel: GS1350-18HP
Figure 13 Front Panel: GS1350-26HP
The following table describes the ports.
Table 3 Panel Connections
CONNECTOR DESCRIPTION
5/10/16/24
1000Base-T RJ-45
Ethernet Ports
These are 10/100/1000Base-T auto-negotiating and auto-crossover Ethernet ports.
Connect these ports to a computer, a hub, a router, or an Ethernet switch.
5/8/16/24 1000Base-
T RJ-45 PoE Ports
These are 10/100/1000Base-T auto-negotiating and auto-crossover Ethernet ports.
Connect these ports to a computer, a hub, a router, or an Ethernet switch.
1/2 SFP Slots
(only available for
GS1350-6HP/12HP)
Use SFP transceivers in these ports for high-bandwidth backbone connections.