GS1350 Series User’s Guide
322
CHAPTER 45
Surveillance Mode
45.1 Overview
Aside from the Web Configurator in Standard mode that has a complete set of configuration for
network installation, you can switch to Surveillance mode.
Surveillance mode is a set of menus specifically designed for users who are mostly using the Switch for
configuring and managing PoE devices like IP cameras.
Use a browser that supports HTML5, such Microsoft Edge, Internet Explorer 11, Mozilla Firefox, or Google
Chrome. The recommended screen resolution is 1366 by 768 pixels.
The following sections introduces the configuration and functions of the Web Configurator In
Surveillance mode.
Click Surveillance at the top right corner of the Web Configurator to switch between the Web
Configurator’s Standard or Surveillance mode.
Figure 238 Web Configurator - Surveillance Mode
This section describes the screens for System Status and Neighbor Details.
45.1.1 What You Can Do
• Use the Summary screen (Section 45.2 on page 322) to see the Switch’s general device information,
system status, and IP addresses. You can also display other status screens for more information.
• Use the Neighbor Detail screen (Section 45.2.1 on page 324) to view and manage Switch’s neighbor
devices.
45.2 Summary
The Summary screen displays when you log into the Switch or click Summary at the top right corner of
the Web Configurator. The Summary screen displays general device information, system status,
connected ports, used power for PoE devices, and its IP addresses.
To Next Page
Loading...
