Chapter 15 Broadcast Storm Control
GS1350 Series User’s Guide
152
CHAPTER 15
Broadcast Storm Control
15.1 Broadcast Storm Control Overview
This chapter introduces and shows you how to configure the broadcast storm control feature.
Broadcast storm control limits the number of broadcast, multicast and destination lookup failure (DLF)
packets the Switch receives per second on the ports. When the maximum number of allowable
broadcast, multicast and/or DLF packets is reached per second, the subsequent packets are
discarded. Enable this feature to reduce broadcast, multicast and/or DLF packets in your network. You
can specify limits for each packet type on each port.
15.1.1 What You Can Do
Use the Broadcast Storm Control screen (Section 15.2 on page 152) to limit the number of broadcast,
multicast and destination lookup failure (DLF) packets the Switch receives per second on the ports.
15.2 Broadcast Storm Control Setup
Click Advanced Application > Broadcast Storm Control in the navigation panel to display the screen as
shown next.
Figure 117 Advanced Application > Broadcast Storm Control
To Next Page
Loading...
