Chapter 27 Link Layer Discovery Protocol (LLDP)
GS1350 Series User’s Guide
216
27.5.1 LLDP Remote Port Status Detail
This screen displays detailed LLDP status of the remote device connected to the Switch. Click Advanced
Application > LLDP > LLDP Remote Status (Click Here) and then click an index number, for example 1, in
the Index column in the LLDP Remote Status screen to display the screen as shown next.
Figure 158 Advanced Application > LLDP > LLDP Remote Status > LLDP Remote Port Status Detail (Basic
TLV)
The following table describes the labels in Basic TLV part of the screen.
System Name This displays the system name of the remote device.
Management
Address
This displays the management address of the remote device. It could be the MAC address or
IP address.
Table 97 Advanced Application > LLDP > LLDP Remote Status (continued)
LABEL DESCRIPTION
Table 98 Advanced Application > LLDP > LLDP Remote Status > LLDP Remote Port Status Detail (Basic
TLV)
LABEL DESCRIPTION
Local Port This displays the number of the Switch’s port to which the remote device is connected.
Basic TLV
To Next Page
Loading...
