Chapter 52 Maintenance
GS1350 Series User’s Guide
376
CHAPTER 52
Maintenance
This section explains how to configure the screens that let you maintain the firmware and configuration
files.
52.1 What You Can Do
• Use the Backup Configuration screen (Section 52.2 on page 376) to save your configuration for later
use.
• Use the Firmware Upgrade screen (Section 52.3 on page 377) to upload the latest firmware.
• Use the Reboot System screen (Section 52.4 on page 378) to restart the Switch without physically
turning the power off and load a specific configuration file.
• Use the Restore Configuration screen (Section 52.5 on page 379) to upload a stored device
configuration file.
• Use the Save Configuration screen (Section 52.6 on page 379) to save the current configuration
settings to a specific configuration file on the Switch.
• Use the Tech-Support screen (Section 52.7 on page 380) to create reports for customer support if
there are problems with the Switch.
52.2 Backup Configuration
Backing up your Switch configurations allows you to create various “snap shots” of your device from
which you may restore at a later date.
Click Maintenance > Maintenance > Backup Configuration to display the screen as shown next. Use this
screen to back up your current Switch configuration and log files to a server or as local files to your
computer.
Figure 278 Maintenance > Maintenance > Backup Configuration
Follow the steps below to back up the current Switch configuration to your computer in this screen.
To Next Page
Loading...
