ZyXEL Communications GS1350 Series - CHAPTER 33 Maintenance; 33.2 Maintenance Settings

GS1350 Series User’s Guide
257
CHAPTER 33
Maintenance
33.1 Overview
This chapter explains how to configure the screens that let you maintain the firmware and configuration
files.
33.1.1 What You Can Do
• Use the Maintenance screen (Section 33.2 on page 257) to manage firmware and your configuration
files.
• Use the Firmware Upgrade screen (Section 33.3 on page 260) to upload the latest firmware.
• Use the Restore Configuration screen (Section 33.4 on page 261) to upload a stored device
configuration file.
• Use the Backup Configuration screen (Section 33.5 on page 262) to save your configurations for later
use.
• Use the Erase Running-Configuration screen (Section 33.2.1 on page 258) to reset the configuration to
the Zyxel default configuration settings.
• Use the Save Configuration screen (Section 33.2.2 on page 259) to save the current configuration
settings to a specific configuration file on the Switch.
• Use the Reboot System screen (Section 33.2.3 on page 259) to restart the Switch without physically
turning the power off and load a specific configuration file.
• Use the Tech-Support screen (Section 33.6 on page 262) to create reports for customer support if
there are problems with the Switch.
• Use the Certificates screen (Section 33.7 on page 264) to see the Certificate screen and import the
Switch's CA-signed certificates.
33.2 Maintenance Settings
Use this screen to manage firmware and your configuration files. Click Management > Maintenance in
the navigation panel to open the following screen.