Chapter 9 VLAN
GS1350 Series User’s Guide
125
Figure 99 Advanced Application > VLAN > VLAN Detail
The following table describes the labels in this screen.
9.3 VLAN Configuration
Use this screen to view IEEE 802.1Q VLAN parameters for the Switch. Click Advanced Application > VLAN
> VLAN Configuration to see the following screen.
Figure 100 Advanced Application > VLAN > VLAN Configuration
The following table describes the labels in the above screen.
Table 48 Advanced Application > VLAN > VLAN Detail
LABEL DESCRIPTION
VLAN Status Click this to go to the VLAN Status screen.
VID This is the VLAN identification number that was configured in the corresponding VLAN
configuration screen.
Port Number This column displays the ports that are participating in a VLAN. A tagged port is marked as T, an
untagged port is marked as U and ports not participating in a VLAN are marked as “–“.
Elapsed Time This field shows how long it has been since a normal VLAN was registered or a static VLAN was
set up.
Status This field shows how this VLAN was added to the Switch.
Static: added as a permanent entry.
Table 49 Advanced Application > VLAN > VLAN Configuration
LABEL DESCRIPTION
Static VLAN Setup Click Click Here to configure the Static VLAN for the Switch.
VLAN Port Setup Click Click Here to configure the VLAN Port for the Switch.
Voice VLAN Setup Click Click Here to configure the Voice VLAN for the Switch.
MAC Based VLAN Setup Click Click Here to configure the MAC Based VLAN for the Switch.
Vendor ID Based VLAN
Setup
Click Click Here to configure the Vendor ID Based VLAN for the Switch.
To Next Page
Loading...
