Chapter 4 Web Configurator
GS1350 Series User’s Guide
59
Figure 45 Wizard > VLAN > VLAN Setting
Each field is described in the following table.
4.4.4 QoS
In QoS, you can create QoS settings.
In order to create QoS settings, please do the following. Click Wizard > QoS > QoS Setting to access this
screen.
Table 14 Wizard > VLAN > VLAN Setting
LABEL DESCRIPTION
VLAN Setting
Default VLAN 1 /
Access Untagged
port
After you create a VLAN and select the VLAN ID from the drop-down list box, select ports
and use the right arrow to add them as the untagged ports to a VLAN group.
VLAN member port
VLAN Type a number between 2 and 4094 to create a VLAN.
Trunk Tagged port Select ports and use the downward arrow to add them as the tagged ports to the VLAN
group(s) you created.
Finish Review the information and click Finish to create the task.
Cancel Click Cancel to exit this screen without saving.
To Next Page
Loading...
