ZyXEL Communications GS1350 Series - 9.8 Vendor ID Based VLAN

Chapter 9 VLAN
GS1350 Series User’s Guide
131
The following table describes the fields in the above screen.
9.8 Vendor ID Based VLAN
The Vendor ID based VLAN feature assigns incoming untagged packets to a VLAN and classifies the
traffic based on the source MAC address of the packet. When untagged packets arrive at the switch,
the source MAC address of the packet is looked up in a Vendor ID to VLAN mapping table. If an entry is
found, the corresponding VLAN ID is assigned to the packet. The assigned VLAN ID is verified against the
VLAN table. If the VLAN is valid, ingress processing on the packet continues; otherwise, the packet is
dropped.
This feature allows users to change ports without having to reconfigure the VLAN. You can assign a
802.1p priority to the vendor ID based VLAN and define a vendor ID to VLAN mapping table by entering
a specified source MAC address and mask in the vendor ID based VLAN setup screen. You can also
delete a vendor ID based VLAN entry in the same screen.
For every vendor ID based VLAN rule you set, you can specify a weight number to define the rule’s
priority level. As rules are processed one after the other, stating a priority order will let you choose which
rule has to be applied first and which second.
Click the Vendor ID Based VLAN Setup link in the VLAN Configuration screen to see the following screen.
Table 53 Advanced Application > VLAN > VLAN Configuration > MAC Based VLAN Setup
LABEL DESCRIPTION
Name Type a name up to 32 alpha numeric characters for the MAC-based VLAN entry.
MAC Address Type a MAC address that is bind to the MAC-based VLAN entry. This is the source MAC
address of the data packet that is looked up when untagged packets arrive at the Switch.
VID Type an ID (from 1 to 4094) for the VLAN that is associated with the MAC-based VLAN entry.
Priority Type a priority (0 – 7) that the Switch assigns to frames belonging to this VLAN. The higher the
numeric value you assign, the higher the priority for this MAC-based VLAN entry.
Add Click Add to save the new MAC-based VLAN entry.
Cancel Click Cancel to clear the fields in the MAC-based VLAN entry.
Index This field displays the index number of the MAC-based VLAN entry.
Name This field displays the name of the MAC-based VLAN entry.
MAC Address This field displays the source MAC address that is bind to the MAC-based VLAN entry.
VID This field displays the VLAN ID of the MAC-based VLAN entry.
Priority This field displays the priority level which is assigned to frames belonging to this MAC-based
VLAN.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in
the table heading row to select all entries.
Delete Click Delete to remove the selected entry from the summary table.
Cancel Click Cancel to clear the check boxes.