ZyXEL Communications GS1350 Series - 50.3 ONVIF

Chapter 50 Networking
GS1350 Series User’s Guide
362
50.3 ONVIF
When ONVIF is enabled and configured, the Switch can obtain the ONVIF security device’s information
such as system name and IP address. This lets you to know which IP-based security products, for example
IP camera or NVR (network video recorder), is connected to the Switch.
Use the ONVIF screen to enable the ONVIF protocol on the Switch.
Figure 268 Networking > ONVIF
Index This field displays the index number of an entry.
Domain
Name Server
This field displays the IP address of the DNS server.
Add Click this button to create a new IP address for the DNS server.
Edit Click this button to configure the IP address of the DNS server.
Delete Click this button to remove the IP address of the DNS server.
Management IP Address
Use these fields to set the settings for the management port.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Index This field displays the index number of an entry.
IP Address This field displays IP address of the Switch in the IP domain.
IP Subnet
Mask
This field displays the subnet mask of the Switch in the IP domain.
VID This field displays the VLAN identification number of the IP domain on the Switch.
Default
Gateway
This field displays the IP address of the default outgoing gateway in dotted decimal notation.
Add Click this button to create new settings for the management port.
Edit Click this button to configure the settings for the management port.
Delete Click this button to remove the settings for the management port.
Table 182 Networking > IP Setup (continued)
LABEL DESCRIPTION