Chapter 9 VLAN
GS1350 Series User’s Guide
124
Figure 98 Advanced Application > VLAN: VLAN Status
The following table describes the labels in this screen.
9.2.1 VLAN Details
Use this screen to view detailed port settings and status of the static VLAN group. Click on an index
number in the VLAN Status screen to display VLAN details.
Table 47 Advanced Application > VLAN: VLAN Status
LABEL DESCRIPTION
VLAN Search by
VID
Enter an existing VLAN ID numbers (separated by a comma) and click Search to display only the
specified VLANs in the list below.
Leave this field blank and click Search to display all VLANs configured on the Switch.
The Number of
VLAN
This is the number of VLANs configured on the Switch.
The Number of
Search Results
This is the number of VLANs that match the searching criteria and display in the list below.
This field displays only when you use the Search button to look for certain VLANs.
Index This is the VLAN index number. Click on an index number to view more VLAN details.
VID This is the VLAN identification number that was configured in the corresponding VLAN
configuration screen.
Name This fields shows the descriptive name of the VLAN.
Tagged Port This field shows the tagged ports that are participating in the VLAN.
Untagged Port This field shows the untagged ports that are participating in the VLAN.
Elapsed Time This field shows how long it has been since a normal VLAN was registered or a static VLAN was
set up.
Status This field shows how this VLAN was added to the Switch.
Static: added as a permanent entry.
Change Pages Click Previous or Next to show the previous or next screen if all status information cannot be seen
in one screen.
To Next Page
Loading...
