Chapter 34 Access Control
GS1350 Series User’s Guide
275
Figure 204 Management > Access Control > Logins
The following table describes the labels in this screen.
Table 136 Management > Access Control > Logins
LABEL DESCRIPTION
Administrator
This is the default administrator account with the “admin” user name. You cannot change the default administrator
user name.
Old Password Type the existing system password (1234 is the default password when shipped).
New Password Enter your new system password.
Retype to
confirm
Retype your new system password for confirmation.
Edit Logins
You may configure passwords for up to four users. These users can have read-only or read/write access. You can
give users higher privileges via the Web Configurator or the CLI. For more information on assigning privileges via the
CLI see the Ethernet Switch CLI Reference Guide.
User Name Set a user name (up to 32 ASCII characters long).
Password Enter your new system password.
Retype to
confirm
Retype your new system password for confirmation.
To Next Page
Loading...
