Chapter 48 Port
GS1350 Series User’s Guide
336
Figure 247 PoE Example Application
To view the current amount of power that PDs are receiving from the Switch, click Port > PoE Setup > PoE
Status.
Figure 248 Port > PoE Setup > PoE Status
The following table describes the labels in this screen.
Table 168 Port > PoE Setup > PoE Status
LABEL DESCRIPTION
PoE Mode This field displays the power management mode used by the Switch, whether it is in
Classification or Consumption mode.
Total Power (W) This field displays the total power the Switch can provide to the connected PoE-enabled
devices on the PoE ports.
To Next Page
Loading...
