Chapter 6 Tutorials
GS1350 Series User’s Guide
76
Figure 56 Tutorial: Specify DHCP VLAN
5 Click the Port link at the top right corner.
6 The DHCP Snooping Port Configure screen appears. Select Trusted in the Server Trusted state field for port
4 because the DHCP server is connected to port 4. Keep ports 5 and 6 Untrusted because they are
connected to DHCP clients. Click Apply.
Figure 57 Tutorial: Set the DHCP Server Port to Trusted
7 Go to Advanced Application > DHCP Snooping > Configure > VLAN, show VLAN 100 by entering 100 in
the VLAN Search by VID field and click Search. Then select Yes in the Enabled field of the VLAN 100 entry
shown at the bottom section of the screen.
If you want to add more information in the DHCP request packets such as source VLAN ID or system
name, you can also select an Option82 Profile in the entry. See Section 23.4.1.3 on page 194.
To Next Page
Loading...
