Chapter 20 Configuration: VLAN
GS1900 Series User’s Guide
132
20.2.5 The VLAN Po rt Sc re e n
Port-based VLANs are VLANs where the packet forwarding decision is based on the destination MAC
address and its associated port. Port-based VLANs require allowed outgoing ports to be defined for
each port. Therefore, if you wish to allow two subscriber ports to talk to each other, for example,
between conference rooms in a hotel, you must define the egress (an egress port is an outgoing port,
that is, a port through which a data packet leaves) for both ports. Port-based VLANs are specific only to
the Switch on which they were created.
Use this screen to view VLAN port settings. Click Co nfig ura tio n > VLAN > VLAN > VLAN Po rt to open this
screen.
Fig ure 129 Configuration > VLAN > VLAN > VLAN Port
The following table describes the labels in this screen.
Table 77 Configuration > VLAN > VLAN > VLAN Port
LABEL DESCRIPTIO N
VLAN Port
VLAN ID Select the ID of the VLAN you want to configure.
Port Displays the port index value.
To Next Page
Loading...
