ZyXEL Communications GS1900-8HP - Monitor: System; Mo Nito R: Syste M; Overview; What You Can Do in this Chapter

GS1900 Series User’s Guide
64
C HAPTER 7
Mo nito r: Syste m
7.1 O ve rvie w
This section provides information for Syste m in Mo nitor. Use the Syste m screens to view general Switch
settings.
7.1.1 Wha t You C a n Do in this C ha pte r
•The IP screen (
Section 7.2 on page 64) displays IPv4 and IPv6.
• The Inform a tio n screen (
Section 7.3 on page 65) displays the system information.
7.2 IP
The Switch needs an IP address for it to be managed over the network. The factory default IP address is
192.168.1.1. The subnet mask specifies the network number portion of an IP address. The factory default
subnet mask is 255.255.255.0.
7.2.1 IPv4
Use this screen to view the Switch’s IPv4 information. Click Mo nito r > Syste m > IP > IPv4 to open this
screen.
Fig ure 66 Monitor > System > IP > IPv4
The following table describes the labels in this screen.
Table 23 Monitor > System > IP > IPv4
LABEL DESCRIPTIO N
DHCP State This field displays the state of Dynamic Host Configuration Protocol RFC 2131 and RFC 2132
(DHCP).
IP Address This field displays IP address of the Switch in the IP domain.