Chapter 24 Configuration: Mirror
GS1900 Series User’s Guide
154
Fig ure 154 Configuration > Mirror
The following table describes the labels in this screen.
Table 101 Configuration > Mirror
LABEL DESCRIPTIO N
Mirror
Mirroring Select Ena b le to activate port mirroring on the Switch or Disa ble to disable the feature.
Monitor Port The monitor port is the port you copy the traffic to in order to examine it in more detail without
interfering with the traffic flow on the original ports. Type the port number of the monitor port.
Egress Specify the ports to mirror outgoing traffic.
Available Click < to move a severity type from the acting box to the available box.
Click > to move a severity type to the acting box from the available box.
Acting Click < to move a severity type from the acting box to the available box.
Click > to move a severity type to the acting box from the available box.
>Click > to move a severity type to the acting box from the available box.
<Click < to move a severity type from the acting box to the available box.
Ingress Specify the ports to mirror incoming traffic.
Available Click < to move a severity type from the acting box to the available box.
Click > to move a severity type to the acting box from the available box.
Acting Click < to move a severity type from the acting box to the available box.
Click > to move a severity type to the acting box from the available box.
>Click > to move a severity type to the acting box from the available box.
To Next Page
Loading...
