ZyXEL Communications GS2210 Series - Configure the ACL (Policy Rule)

122/215
www.zyxel.com
3.5.3 Configure the ACL (Policy Rule)
1 Set up the Policy Rule on Switch-2: In section 3.5.2, we created
4 Classifiers. We can find that they are shown in the Policy Rule
window for us to match. Go to Menu > Advanced Application
> Policy Rule.
2 The Policy Rule of download traffic in VLAN 10: Check the
“Active” box and key in the Name. Select the Classifier of
download in VLAN 10 (DL10). Set up the action to do if match
this Classifier: Bandwidth Metering=40960 kbps. Enable
Metering and set the Out-of-profile action (Means what to do
if the rate is over the bandwidth) as “Drop the packet” (Means
Switch-2 will drop the traffic which is over the bandwidth).
Press “Add”.