ZyXEL Communications GS2210 Series - Configure Switch-2

131/215
www.zyxel.com
4.2.2 Configure Switch-2
1 Configure the VLAN 10 and VLAN 20 on Switch-2. Please refer
to the topic: 2.1 How to configure the switch to separate traffic
between departments.
2 Configure the IP addresses for Switch on BOTH VLAN 10 and
VLAN 20 as shown in the figure. Please refer to the topic: 1.1
How to change the switch management IP address to avoid
accessing the wrong device.
3 Configure the IGMP Routing: Enter the web GUI and go to
Menu > IP Application > IGMP. Check the “Active” box and
select VLAN 10 and VLAN 20 as IGMP-v2. Select “Unknown
Multicast Frame” as “Drop”. Click “Apply”.