134/215
4.3 How to configure IGMP Snooping for multicast clients in
the same LAN
The example shows administrators how to configure IGMP Snooping for
multicast clients and steaming servers in the same VLAN. When
MediaServer multicasts the stream, IGMP snooping allows the switch to
learn multicast groups without having the user to manually configure
the each switch. This prevents the switch from flooding multicast streams
on ports that have no members for these multicast addresses.
Configure IGMP Snooping for multicast clients in the same LAN
Note:
All network IP addresses and subnet masks are used as examples in this article.
Please replace them with your actual network IP addresses and subnet masks. This
example was tested using XGS4600-32 (Firmware Version: V4.50).
To Next Page
Loading...
