ZyXEL Communications GS2210 Series - Implementing Poe; How Does the Poe LED Works

213/215
www.zyxel.com
Implementing PoE
7.1 How does the PoE LED works
In traditional design, users have to check the status of PoE by using
either Web GUI or CLI. In this new design, ZYXEL provides an additional
method to check power consumption from device panel to help users
directly identify the switch’s power consumption. There are 5 LEDs
representing PoE Usage on the front panel. These 5 LEDs can show users
different power consumption percentage.
Note:
The example below is tested with XGS1930-28HP / 52HP (Firmware Version: V4.50).
This feature is for L2 capable switches only. (Only for XGS1930 series)
arpscan