188/215
5.9.2 Test the Result
1 Go to Advance Application > IP Source Guard. An entry with
your device’s MAC Address and IP Address should appear
with “Static” Type and “Infinity” Lease in the IP Source Guard
Table.
2 Configure your Admin-PC with the Static IP address. In this
example, we use “192.168.1.10”. Connect this to any access
port. This PC should be able to reach the USG.
3 Configure another random PC with this Static IP address. In
this example, we use “192.168.1.10”. This random PC should
be able to reach the USG (due to a different MAC address).
To Next Page
Loading...
