ZyXEL Communications GS2210 Series - 8.3 General Setup

66/215
www.zyxel.com
2.1.1 Configure Switch-1
1 Use AdministratorPC to set VLAN 1 in Switch-1: Port 1, 2 as
Normal port. (Prevent VLAN 1 broadcast packets to port 1, 2).
Enter the web GUI and go to Menu > Advanced Application >
VLAN > VLAN Configuration > Static VLAN Setup > VID > 1.
Select port 1, 2 as Normal. Click “Add”.
2 Use AdministratorPC to create VLAN 10 in Switch-1: Enter the
web GUI and go to Menu > Advanced Application > VLAN >
VLAN Configuration > Static VLAN Setup. Check the “ACTIVE”
box. Type the Name and VLAN Group ID=10. Select port 1, 5
as Fixed and uncheck Tx Tagging (Untagged) on port 1 and
check Tx Tagging (Tagged) on port 5. Click “Apply”.