ZyXEL Communications GS2210 Series - Configure Switch-1

138/215
www.zyxel.com
5.1.1 Configure Switch-1
1 Enter web GUI and go to Menu > Advanced Application > Port
Security. Check port 3 and set the “Limited Number of
Learned MAC Address” to 2.
Note:
The Zyxel switch sends Link Layer Discovery Protocol (LLDP) packets every
period of time by default. If Switch-2 does not support LLDP or is disabled,
Limited Number of Learned MAC Address can be set to 1. Otherwise, set
this to 2.