ZyXEL Communications GS2210 Series - Test the Result

89/215
www.zyxel.com
2.3.4 Test the Result
1 PC-1 can get the IP Address assigned by Switch successfully.
We can check this by using the command “ipconfig” in
command prompt. PC-1 will get an IP address in the range of:
192.168.10.11-192.168.10.20 and the gateway is 192.168.10.1.
2 PC-2 can get the IP Address assigned by Switch successfully.
We can check this by using the command “ipconfig” in
command prompt. PC-2 will get an IP address in the range of:
192.168.20.11-192.168.20.20 and the gateway is 192.168.20.1.