ZyXEL Communications GS2210 Series - Configuration in the Switch

152/215
www.zyxel.com
5.4.1 Configuration in the Switch
1 Access the Switch’s Web GUI.
2 Go to Advance Application > AAA > RADIUS Server Setup.
Configure the RADIUS server’s IP address and set the shared
secret. Click Apply.
3 Go to Advance Application > Port Authentication > 802.1x.
Check the 802.1x Active box as well as for all ports
connected to end devices. Do not check active box of ports
connected to either the USG, RADIUS-Server, or
Private-Server.
Note:
The shared secret must match the secret of your RADIUS server’s client
profile.