ZyXEL Communications GS2210 Series - Configuration in the Switch

181/215
www.zyxel.com
5.8.1 Configuration in the Switch
1 Access the Switch’s Web GUI.
2 Go to Go to Advance Application > VLAN > VLAN
Configuration > Static VLAN Setup. For this example, all traffic
entering access ports are sent to VLAN 1. VLAN 1 should be
fixed and untagged for all access ports. Click Add.
3 Go to Advance Application > VLAN > VLAN Configuration >
VLAN Port Setup. Configure all access ports with PVID 1. Click
Apply.