ZyXEL Communications GS2210 Series - Test the Result

20/215
www.zyxel.com
1.2.2 Test the Result
If customer accidentally deletes the IP interface in VLAN 200
(192.168.200.1), Switch-B will not be able to ping Switch.
Users can use two methods to restore Switch to Custom
Default and prevent service down-time.
1 Hardware button
Press and hold down the RESTORE button on the panel
for 3 ~ 6 seconds until Power LED turns blinking green.
Note:
1. RESTORE Button behaviors:
No Action: Press < 3 seconds
Return to custom default: 3 ~ 6 seconds until Power LED
turns blinking green
Factory Default: 7 ~ 10 seconds until power LED turns solid
amber
2. When triggering Custom default, both Config 1 and Config 2
will be reset to Custom Default configuration without
undergoing reboot.