ZyXEL Communications GS2210 Series - How to Configure the Switch with a Device Name to Avoid Accessing the Wrong Device

25/215
www.zyxel.com
1.4 How to configure the switch with a device name to avoid
accessing the wrong device
This example shows administrators how to use the Web GUI to manage
device name and avoid accessing the wrong devices. As shown below,
the PC connects with Switch-1 in the environment. In the default setting,
device name (System Name) will be the model name (XGS4600 in this
example).
Change the device name of the switch
Note:
All network IP addresses and subnet masks are used as examples in this article.
Please replace them with your actual network IP addresses and subnet masks. This
example was tested using XGS4600-32 (Firmware Version: V4.50).