ZyXEL Communications GS2210 Series - Configure the Classifier

191/215
www.zyxel.com
5.10.2 Configure the Classifier
1 Set up the Classifier: Go to Menu > Advanced Application >
Classifier > Classifier Configuration. Set up Classifier: For VLAN
20.
2 The Classifier of VLAN 20: Check the “Active” box and key in
the classifier Name. Set Layer 2 > VLAN as 20 and Layer 3 >
Destination as 192.168.1.150/32. Press “Add”.
Note:
For more details about ACL, please refer to topic: 3.5 How to configure ACL
to rate limit VLAN traffic.