ZyXEL Communications GS2210 Series - How to Configure the Switch to Separate VOIP Traffic from Data Traffic

202/215
www.zyxel.com
6.2 How to configure the switch to separate VOIP traffic from
data traffic
The example shows administrators how to use Voice VLAN to separate
untagged VOIP traffic from untagged data traffic. Unlike traditional
VOIP applications, the Voice VLAN feature separates VOIP and data
traffic as traffic reaches the switch. This means that the VLAN
architecture begins on the switch and not on the IP Phones themselves.
Configure Voice VLAN to separate VOIP traffic from data traffic
Note:
All network IP addresses and subnet masks are used as examples in this article.
Please replace them with your actual network IP addresses and subnet masks. This
example was tested using XGS4600-32 (Firmware Version: V4.50).