70/215
3 Use AdministratorPC to create VLAN 20 in Switch-2. Enter the
web GUI and go to Menu > Advanced Application > VLAN >
VLAN Configuration > Static VLAN Setup. Check the “ACTIVE”
box. Type the Name and VLAN Group ID=20. Select port 4, 5 as
Fixed and uncheck Tx Tagging (Untagged) on port 4 and
check Tx Tagging (tagged) on port 5. Click “Apply”.
4 Set the PVID on Switch-2: Go to Menu > Advanced Application
> VLAN > VLAN Configuration > VLAN Port Setup. Set port 3 as
PVID=10 (VLAN 10) and port 4 as PVID=20.
To Next Page
Loading...
