ZyXEL Communications NAS Series - Page 92

Chapter 8 Storage Manager
Cloud Storage User’s Guide
92
8.4.2.2 Editing a Created Target
You can edit iSCSI target settings such as allowed initiator (IQN), CHAP, and CRC checksum after
you create a target. Click Storage Manager > iSCSI Targets and select Edit to open the
following screens.
Properties
The Properties screen allows you to edit the allowed initiator (IQN), CHAP authentication features
as shown in the following screen.
Figure 53 iSCSI Targets > Edit > Properties
Apply Click Apply to save the settings.
Cancel Click Cancel to close the screen without saving any settings.
Table 25 Create a New Target (continued)
LABEL DESCRIPTION
Table 26 iSCSI Targets > Edit > Properties
LABEL DESCRIPTION
Name Displays the name of your iSCSI target.
IQN Displays the iSCSI Qualified Name (IQN) of the target.
Allowed initiator
(IQN)
The allowed initiator name is in the iSCSI Qualified Name (IQN) format. You can connect
with another initiator by changing the allowed initiator IQN.
The system will display a prompt if you enter an invalid character or username of
unacceptable length in this field.