Chapter 12 AP Profile
NWA50AX User’s Guide
110
Fig ure 66 Configuration > Object > AP Profile > SSID > Security List > Add/Edit Security Profile> Security
Mode: wpa2 (NWA50AX)
The following table describes the labels in this screen.
Table 45 Configuration > Object > AP Profile > SSID > Security List > AAdd/Edit Security Profile> Security
Mode: wpa2
LABEL DESC RIPTIO N
General Settings
Profile Name Enter up to 31 alphanumeric characters for the profile name. This name is only visible in
the Web Configurator and is only for management purposes. Spaces and underscores
are allowed.
Security Mode Select a security mode from the list: no ne , e nha nc e d - o pe n, we p, wpa 2, wpa 2- m ix or
wp a 3.
e nha nc e d - o pe n uses Opportunistic Wireless Encryption (OWE) which encrypts the
wireless connection when possible.
Authentication Settings
Personal This field is available when you select the wpa 2, wpa 2- m ix or wpa 3 security mode.
Select this option to use a Pre-Shared Key (PSK) with WPA2 encryption or Simultaneous
Authentication of Equals (SAE) with WPA3 encryption.
Pre-Shared Key Enter a pre-shared key of between 8 and 63 case-sensitive ASCII characters (including
spaces and symbols) or 64 hexadecimal characters.
Advance
Note: Click on the Sho w Adva nc e d Se tting s button to show the fields describe below.
To Next Page
Loading...
