247Security Inc. | 4400 North Point Parkway, Suite # 158, Alpharetta, GA 30022, USA | 1-866-693-7492 | www.247securityinc.com
USER MANUAL, ZEUS Pt
45
Enter the file name and click the “Save” button. A file named “mvdr.cfg” will be saved to the
chosen location. You can then rename this file to whatever you want to better identify which DVR it
came from. For example, you can rename the file to incorporate the vehicle name and the date it was
configured like the following: “mdvr_ZEUS PT_122_fw16.0428.cfg”.
4.10.2 UPLOAD CONFIGURATION
This option allows you to select a backup configuration file and upload it to the DVR. This
feature will overwrite all the current settings with the settings from the configuration file. The only value
you may need to change is the “DVR Server name” under the System tab because it was just overwritten
with “DVR Server name” from the configuration file. Note: All previous video data on the DVR will be
lost if you apply uploading with DVR Name is changed.
Note: Download and Upload Configuration feature is not compatible between different versions
of firmware; this feature should only be used when deploying multiple DVRs with same hardware and
software. Installer would configure the first DVR and then download the configuration to his computer,
when installing the subsequent DVRs, installer merely has to upload the previously save configuration
and change the DVR name.
Click the “Browse” button to open the “File Upload” window and select the configuration file
you wish to upload. Click “Open” when the configuration file is selected
Select the configuration file then click on Open
Click “Upload” to start the upload process, then will see message display as below.
To Next Page
Loading...
