116 APPENDIX B: COMMAND LINE REFERENCE
set overRidetxpower Set Tx power override
set operationMode Set operation mode
set password Modify password
set passphrase Modify passphrase
set power Set transmit power
set quietAckCtsAllow Allow Ack/Cts frames during quiet period
set quietDuration Duration of quiet period
set quietOffset Offset of quiet period into the beacon period
set radiusname Set RADIUS name or IP address
set radiusport Set RADIUS port number
set radiussecret Set RADIUS shared secret
set rate Set data rate
set regulatorydomain Set regulatory domain
set remoteAP Set remote access point’s MAC address
set hwtxretries Set HW transmit retry limit
set swtxretries Set SW transmit retry limit
set rtsthreshold Set RTS/CTS threshold
set shortpreamble Set short preamble
set shortslottime Set short slot time
set sntpserver Set SNTP/NTP server IP address
set softwareretry Set software retry
set spurImmunityLvl Set ANI parameter for spur immunity level
set ssid Set service set ID
set ssidsuppress Set SSID suppress mode
set SuperG SuperG features
set systemname Set Access Point’s system name
set telnet Set Telnet mode
set timeout Set Telnet timeout
set tzone Set time zone settings
set updateparam Set vendor default firmware update parameters
set watchdog Set watchdog mode
set wds Set WDS mode
set wep Set encryption mode
Table 24 Console Commands
Command Description
To Next Page
Loading...
