3Com 3CRGPC10075 - Page 125

Command Reference 117
set wlanstate Set WLAN state
set wirelessmode Set wireless LAN mode
set 80211d Set 802.11d mode
set http Set HTTP enable/disable
set HttpPort Set HTTP port number
set https Set HTTPS enable/disable
set HttpsPort Set HTTPS port number
set syslog Set syslog disable/broadcast/unicast
set syslogSeverity Set syslog severity level
set syslogServer Set unicast syslog server IP address/name
set manageOnlyLan Set management only via LAN enable/disable
set roguedetect Set rogue AP detection enable/disable
set rogueinteval Set rogue AP detection interval (range: 3~99
minutes)
set rogueband Set rogue AP detection band(s)
set roguetype Set rogue AP definition
set roguesnmp Set rogue AP detection SNMP trap enable/disable
set roguelegal Add/delete one AP MAC/OUI into/from rogue AP
legal List
set autoConfig Set auto config enable/disable
set autoResponse Set respond to auto config request enable/disable
set autoChangeName Set provide admin logon name and password
enable/disable
set autoSetResp Set provide respond to auto config request
enable/disable
set autoUpdate Set auto update enable/disable
set autoUpgradeOnly Set install later version only enable/disable
set autoUpdateInterval Set auto update interval (1~31days)
set ftpServer Set FTP server address
set fwPathname Set firmware pathname
set ftpLogin Set FTP logon name
set ftpPassword Set FTP password
set
activeCurrentProfile
Set active current profile
Table 24 Console Commands
Command Description