118 APPENDIX B: COMMAND LINE REFERENCE
set profileName Set profile name
set profileVlanId Set profile LAN ID
set APPrimaryProfile Set Access Point’s primary profile
set WDSPrimaryProfile Set primary profile WDS
set securityMode Set security mode
set Accounting Set accounting enable/disable
set Accountingport Set accounting port number
set keyValue Set encryption key value
set keyLength Set encryption key length
set keyIndex Set encryption key index
set UAM Set UAM authentication enable/disable
set UAMMethod Set UAM authentication method
set UAMLoginURL Set UAM authentication logon URL
set UAMLoginFailURL Set UAM authentication logon failure URL
set macAuth Set MAC authentication enable/disable
set snmpMode Set SNMP mode
set snmpCommunity Set SNMP community name
set snmpAccessRight Set SNMP access rights
set snmpAnyStaMode Set SNMP any station mode
set snmpStationIPAddr Set SNMP station address
set trapMode Set trap mode
set trapVersion Set trap version
set trapSendMode Set trap send mode
set trapRecvIp Set trap receiver IP address
set description Set Access Point description
set dhcpMode Set DHCP mode
set wdsMacList Set MAC address list for WDS
set
enableWirelessClient
Set wireless client enable/disable
set isolationType Set isolation type
set winsEnable Set WINS server enable/disable
set winsServerAddr Set WINS server IP address
set wirelessSeparate Set wireless separation mode
Table 24 Console Commands
Command Description
To Next Page
Loading...
