34 CHAPTER 3: CONFIGURING THE ACCESS POINT
WPA-802.1x Options
If you selected WPA-802.1x, you need to configure the settings listed in
Table 8
.
Figure 16 Security Options for WPA-802.1x
Table 8 Options for WPA-802.1x
Option Description
RADIUS Server
Address
Type the host name or IP address of the RADIUS Server on
the network.
RADIUS Port Type the port number used for connections to the RADIUS
Server.
Client Login Name This read-only field displays the name used for the Client
Login on the RADIUS Server. This login name must be
created on the RADIUS Server. On some RADIUS Servers, you
can use the Access Point’s IP address instead of this name.
Shared Key Key used for client logon to the RADIUS Server. Type a key
value that matches the value on the RADIUS Server.
To Next Page
Loading...
