50 CHAPTER 3: CONFIGURING THE ACCESS POINT
Figure 25 System Screen
To configure the system settings:
1 On the menu, click System.
2 Configure the identity of the Access Point on the network. You can edit
the following settings:
■ Access Point Name – This is the name that identifies the Access Point
when you are using the Access Point Management utility.
■ Description (optional) – If there are multiple access points on the
network, type a description in this text box to help you identify the
Access Point.
■ Country or Domain – Select your country from the drop-down list.
Use of certain wireless channels is restricted in some countries. To ensure
that you are using only the approved channels, select your country from
the list.
3 Configure the IP address settings of the Access Point.
To Next Page
Loading...
