EasyManua.ls Logo

3Com 4510G - Page 1107

3Com 4510G
1166 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24-17
In the step above, Switch B and Switch C are configured as symmetric peers, with Switch C in the
symmetric-active mode and Switch B in the symmetric-passive mode. Because the stratus level of
Switch C is 1 while that of Switch B is 3, Switch B is synchronized to Switch C.
# View the NTP status of Switch B after clock synchronization.
[SwitchB] display ntp-service status
Clock status: synchronized
Clock stratum: 2
Reference clock ID: 3.0.1.33
Nominal frequency: 64.0000 Hz
Actual frequency: 64.0000 Hz
Clock precision: 2^7
Clock offset: -21.1982 ms
Root delay: 15.00 ms
Root dispersion: 775.15 ms
Peer dispersion: 34.29 ms
Reference time: 15:22:47.083 UTC Sep 19 2005 (C6D95647.153F7CED)
As shown above, Switch B has been synchronized to Switch C, and the clock stratum level of Switch B
is 2, while that of Switch C is 1.
# View the NTP session information of Switch B, which shows that an association has been set up
between Switch B and Switch C.
[SwitchB] display ntp-service sessions
source reference stra reach poll now offset delay disper
**************************************************************************
[245] 3.0.1.31 127.127.1.0 2 15 64 24 10535.0 19.6 14.5
[1234] 3.0.1.33 LOCL 1 14 64 27 -77.0 16.0 14.8
note: 1 source(master),2 source(peer),3 selected,4 candidate,5 configured
Total associations : 2

Table of Contents

Related product manuals