2-5
Console Port Login Configurations for Different Authentication Modes
Table 2-3 lists Console port login configurations for different authentication modes.
Table 2-3 Console port login configurations for different authentication modes
Authenticati
on mode
Configuration Description
None Configure not to authenticate users
Refer to
Console Port Login
Configuration with Authentication
Mode Being None for details.
Configure to authenticate users using
the local password
Password
Set the local password
Refer to
Console Port Login
Configuration with Authentication
Mode Being Password for details.
Configure to authenticate users
locally or remotely
Configure the authentication mode
Scheme
Create or enter a local user, set the
authentication password, specifies
the level and service type for AUX
users
Refer to
Console Port Login
Configuration with Authentication
Mode Being Scheme for details.
Changes of the authentication mode of Console port login will not take effect unless you exit and enter
again the CLI.
Console Port Login Configuration with Authentication Mode Being
None
Configuration Procedure
Follow these steps to perform Console port login configuration (with authentication mode being none):
To do… Use the command… Remarks
Enter system view system-view —
Enter AUX user interface view user-interface aux 0 —
Configure not to authenticate
users
authentication-mode none
Required
By default, users logging in through
the Console port are not
authenticated.
To Next Page
Loading...
