EasyManua.ls Logo

3Com 4510G - Ip Routing Volume

3Com 4510G
1166 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2-5
IP Routing Volume
Table 2-3 Features in the IP Routing volume
Features Description
IP Routing Overview
This document describes:
z Introduction to IP routing and routing table
z Routing protocol overview
Static Routing
A static route is manually configured by the administrator. The proper
configuration and usage of static routes can improve network
performance and ensure bandwidth for important network applications.
This document describes:
z Static route configuration
z Detecting Reachability of the Static Route’s Nexthop
RIP
Routing Information Protocol (RIP) is a simple Interior Gateway Protocol
(IGP), mainly used in small-sized networks. This document describes:
z RIP basic functions configuration
z RIP advanced functions configuration
z RIP network optimization configuration
IPv6 Static Routing
Static routes are special routes that are manually configured by network
administrators. Similar to IPv4 static routes, IPv6 static routes work well in
simple IPv6 network environments. This document describes:
z IPv6 static route configuration
RIPng
RIP next generation (RIPng) is an extension of RIP-2 for IPv4. RIPng for
IPv6 is IPv6 RIPng. This document describes:
z Configuring RIPng Basic Functions
z Configuring RIPng Route Control
z Tuning and Optimizing the RIPng Network
Policy Routing
Policy routing is to make forwarding decisions based on user-defined
policies. Different from the normal destination-based routing, policy
routing can make routing decisions based on the source address and
other criteria in addition to the destination IP address.
The Switch 4510G implements policy routing through QoS policies. For
details about traffic classification, traffic behavior and QoS policy
configuration commands, refer to QoS Commands in the QoS Volume.
Multicast Volume
Table 2-4 Features in Multicast volume
Features Description
Multicast Overview
This document describes the main concepts in multicast:
z Introduction to Multicast
z Multicast Models
z Multicast Architecture
z Multicast Packets Forwarding Mechanism

Table of Contents

Related product manuals