3Com 4510G - Batch Operations

11-5
z The files in the recycle bin still occupy storage space. To delete a file in the recycle bin, you need
to execute the reset recycle-bin command in the directory that the file originally belongs. It is
recommended to empty the recycle bin timely with the reset recycle-bin command to save
storage space.
z The delete /unreserved file-url command deletes a file permanently and the action cannot be
undone. Execution of this command equals that you execute the delete file-url command and then
the reset recycle-bin command in the same directory.
Restoring a file from the recycle bin
To do… Use the command… Remarks
Restore a file from the recycle
bin
undelete file-url
Required
Available in user view
Emptying the recycle bin
To do… Use the command… Remarks
Enter the original working
directory of the file to be
deleted
cd { directory | .. | / }
Optional
If the original directory of the
file to be deleted is not the
current working directory, this
command is required.
Available in user view
Delete the file under the
current directory and in the
recycle bin
reset recycle-bin [ /force ]
Required
Available in user view
Batch Operations
A batch file is a set of executable commands. Executing a batch file equals executing the commands in
the batch file one by one.
The following steps are recommended to execute a batch file:
1) Edit the batch file on your PC.
2) Download the batch file to the device. If the suffix of the file is not .bat, use the rename command
to change the suffix to .bat.
3) Execute the batch file.
Follow the steps below to execute a batch file:
To do… Use the command… Remarks
Enter system view system-view —
Execute a batch file execute filename Required