3Com 4510G - Table of Contents

i
Table of Contents
1 IP Routing Overview··································································································································1-1
IP Routing and Routing Table·················································································································1-1
Routing ············································································································································1-1
Routing Table ··································································································································1-1
Routing Protocol Overview ·····················································································································1-3
Static Routing and Dynamic Routing·······························································································1-3
Routing Protocols and Routing Priority ···························································································1-3
Displaying and Maintaining a Routing Table ··························································································1-3
2 Static Routing Configuration····················································································································2-1
Introduction ·············································································································································2-1
Static Route·····································································································································2-1
Default Route···································································································································2-1
Application Environment of Static Routing ······················································································2-2
Configuring a Static Route······················································································································2-2
Configuration Prerequisites ·············································································································2-2
Configuration Procedure··················································································································2-3
Detecting Reachability of the Static Route’s Nexthop ············································································2-3
Detecting Nexthop Reachability Through Track··············································································2-3
Displaying and Maintaining Static Routes·······························································································2-4
Static Route Configuration Example·······································································································2-4
Basic Static Route Configuration Example······················································································2-4
3 RIP Configuration······································································································································3-1
RIP Overview ··········································································································································3-1
Operation of RIP······························································································································3-1
Operation of RIP······························································································································3-2
RIP Version ·····································································································································3-2
RIP Message Format·······················································································································3-3
Supported RIP Features··················································································································3-5
Protocols and Standards·················································································································3-5
Configuring RIP Basic Functions ············································································································3-5
Configuration Prerequisites ·············································································································3-5
Configuration Procedure··················································································································3-5
Configuring RIP Route Control ···············································································································3-7
Configuring an Additional Routing Metric························································································3-7
Configuring RIPv2 Route Summarization························································································3-8
Disabling Host Route Reception ·····································································································3-9
Advertising a Default Route·············································································································3-9
Configuring Inbound/Outbound Route Filtering·············································································3-10
Configuring a Priority for RIP·········································································································3-10
Configuring RIP Route Redistribution ···························································································3-11
Configuring RIP Network Optimization ·································································································3-11
Configuring RIP Timers·················································································································3-11
Configuring Split Horizon and Poison Reverse·············································································3-12